Safety and Security/Cameras/Indoor Cameras

SmartLife Indoor Camera

Wi-Fi | HD 720p | Cloud Storage (optional) / microSD (not included) | With motion sensor | Night vision | White

Features

Vendor Part Number: WIFICI05CWT
EAN number: 5412810290048
• Smart IP Camera - responds automatically to record any motion in your room
• HD resolution - for crystal-clear footage capture
• Easy to connect directly into your Wi-Fi network - no separate hub required
• Two-way communication - to hear and speak to those in the room
• Fully supported by all other products in the Nedis® SmartLife range.
An essential addition to any smart home system, this Nedis Smart Home IP Camera connects directly with your Wi-Fi network - no additional hub required - to be triggered by any motion and sound in the room.

Smart IP Camera
Home automation just got simpler. This easy to use camera can be easily connected to your existing Wi-Fi network to monitor rooms for motion.
It records in HD resolution (1280x720 pixels) for complete clarity of the images captured. In addition, the camera is just as powerful at night: with its night vision mode offering a range of 5.0 m.
The camera supports microSD cards of up to 128 GB (not included) to offer plenty of footage storage and its flexible, bendy design means it can be placed anywhere within your room to record a viewing angle of 110° thanks to its 1/4” CMOS sensor.
A 3M adhesive pad is included for fixing to the walls of your room

About NedisSmartLife
Discover a wide and ever-expanding range of products - such as bulbs, switches, sockets, sensors, and cameras - that can all be controlled through an easy-to-use and intuitive app.
Whether you're looking for a single smart bulb or camera, or you want to automate your entire house, discover how accessible smart technology is today.

Packaging

Package contents

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Retail package dimensions Giftbox with eurolock

Width Height Length
67 mm 97 mm 140 mm

Logistic dimensions

Packed per Width Height Length Weight
1 65 mm 95 mm 140 mm 187 g
40 330 mm 305 mm 405 mm 8200 g

Product specifications

Width 53 mm
Height 112 mm
Depth 50 mm
Weight 107 g
Colour White
Built-in microphone Yes
Device power input connection(s) Micro USB
Input current 1.0 A
Power cable side B Micro USB
Power cable side A USB
Power source type Mains Powered
Material Plastic
Cloud Recording Functionality Yes
LED 1
Integrated speakers Yes
Maximum resolution HD 720p
Night vision 5 m
Megapixel 1 MPixel
Lens 4.0 mm
Power cable length 2.00 m
Compatible with Nedis® SmartLife
Viewing angle 110 °
Image chip 1/3" CMOS
Accessories AC Adapter EU Plug
Self-Adhesive Pad
USB-Cable
Input voltage 5 V DC
Maximum power consumption 2.5 W
Power plug Euro
Maximum transmit antenna gain 3 dBi
Maximum transmit power 14 dBm
With motion sensor Yes
App available for Android™
IOS
Transmit frequency range 2400 - 2483.5 MHz
Storage type microSD (not included)
Cloud Storage (optional)
Supported wireless technology Wi-Fi
Number of Products in Package 1 pcs
Operating temperature range -20 - 50 °C

Support

Frequently asked questions

We have found the following questions for you in English

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, it only works for the camera device you have subscribed it with.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

When you SD-Card or Memory is full, the oldest file will be overwritten.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.