SmartLife Smoke Detector
Wi-Fi | Battery Powered | Sensor life cycle: 10 year | EN 14604 | Max. battery life: 24 Months | 85 dB | White | 3 pcs
Features
• Wireless: place the smoke detector anywhere in the house
• Compact size of 76 x 76 x 28.5 mm
• Photoelectric detector, tested according to EN 14604
• Dual light source detection, free from dust & vapor-led false alarms
• Loud alarm signal of 85 dB
• CR123A Battery powered, included (up to 2 years lifetime)
• Low power consumption and self-check as well as low-voltage indication function
• With test button and indication LED light
• Easy to install and minimal maintance
• Supplied with screws and self-adhesive tape pad
• Create numerous automations in the Nedis® SmartLife App for extra safety
Its compact size of only 76 x 76 x 28.5 mm enables you to position it anywhere around the house and makes it unobtrusive, so it will blend in with the interior.
With the Nedis SmartLife App, it is possible to connect and combine the smoke detector to your other smart home products for extra safety. When smoke is detected, you can e.g. arrange that the lights are switched on or the shutters will be opened, or numerous other automations to make your home as secure as possible.
The smoke detector runs on battery which has high sustainability due to its life span of up to 2 years. When the battery is running low, you will receive a notification on your smartphone. This prevents from being bothered by annoying beep sounds in the middle of the night.
About Nedis SmartLife
Discover a wide and ever-expanding range of products - such as bulbs, switches, sockets, sensors, and cameras - that can all be controlled through an easy-to-use and intuitive app. With voice control features supported by Amazon Alexa and Google Home, and no need for anything more than your existing Wi-Fi network, this is the connected, smart homemade simple. Whether you're looking for a single smart bulb or socket, or you want to automate your entire house, discover how accessible smart technology is today.
Packaging
Package contents
Smoke detector
Adhesive pad
Screws
Manual
Retail package dimensions Giftbox with eurolock
| Width | Height | Length |
|---|---|---|
| 100 mm | 100 mm | 95 mm |
Logistic dimensions
| Packed per | Width | Height | Length | Weight |
|---|---|---|---|---|
| 1 | 105 mm | 100 mm | 105 mm | 328 g |
| 6 | 215 mm | 120 mm | 320 mm | 2160 g |
| 24 | 335 mm | 260 mm | 445 mm | 9500 g |
Product specifications
| Width |
100 mm |
| Height |
100 mm |
| Depth |
95 mm |
| Weight |
254 g |
| Colour |
White |
| Power source type |
Battery Powered |
| Material |
Plastic |
| Lifespan in years |
10 year |
| With test button |
Yes |
| Sensor life cycle |
10 year |
| Includes mounting material |
Yes |
| Sound |
85 dB |
| With pause button |
Yes |
| Required batteries (included) |
1x CR123A |
| Compatible with |
Nedis® SmartLife |
| Maximum transmit antenna gain |
3 dBi |
| Input voltage |
3 V DC |
| App available for |
Android™ IOS |
| Transmit frequency range |
2412 - 2472 MHz |
| Maximum transmit power |
20 dBm |
| Input current |
1.4 A |
| Supported wireless technology |
Wi-Fi |
| Maximum power consumption |
1.5 W |
| Control Through Mobile App |
Yes |
| Number of Products in Package |
3 pcs |
| Operating temperature range |
-10 - 50 °C |
| EN-compliant |
EN 14604 |
| Max. battery life |
24 Months |
| Battery type |
CR123A |
| SmartLife |
Yes |
Support
Frequently asked questions
How do I reset the detector so I can add it to the app?
Take out the battery
Put the battery back
Wait for about 3 seconds.
Press and hold the big button for 4 seconds.
The light in the detector will start to blink.
The detector might make a loud(!) noise
My device does not show up in Google Home.
This device is not compatible with Google Home.
If one detector sounds the alarm, will it trigger other detectors?
No, these detectors are not linked like that.
They are not connected to your wifi all the time.
They are in a sort of sleep mode until they measure smoke and/or heat
If this happens, they wake up, connect to your wifi and send a signal to the server which sends a notification to your phone.
Because they are not connected constantly, you can't send a signal to the detector and activate it.
You can use automations to activate sirens, lights and smart plugs for example.