Turvallisuus ja valvonta/Kamerat/Sisäkamerat

SmartLife Sisäkamera

Wi-Fi | HD 720p | MicroSD (ei sisälly) / Pilvipalvelutallennus (valinnainen) | Liiketunnistimella | Yökuvaus | Valkoinen

Ominaisuudet

Valmistajan koodi: WIFICI05CWT
EAN: 5412810290048
• Smart IP -Kamera aktivoituu automaattisesti, kun huoneessa havaitaan liikettä tai ääntä
• HD-videotarkkuus takaa kristallinkirkkaan kuvanlaadun
• Helppo yhdistää suoraan Wi-Fi-verkkoon, ei vaadi erillistä liitäntää
• Kaksisuuntainen yhteys, joten voit kuulla huoneessa olijat ja puhua heille
• Tukee täysin kaikkia Nedis® SmartLife -valikoiman tuotteita.
Nedis Smart Home IP -Kamera on tärkeä lisä jokaiseen älykotijärjestelmään. Se yhdistyy suoraan Wi-Fi-verkkoon ilman lisäliitäntää ja se aktivoituu heti, kun huoneessa havaitaan liikettä tai ääntä.

Smart IP -Kamera
Kodin automaatiosta tuli juuri helpompaa. Helppokäyttöisen kameran voi yhdistää vaivattomasti olemassa olevaan Wi-Fi-verkkoon valvomaan huoneita äänen ja liikkeen varalta.
HD-videotarkkuus (1 280 x 720 pikseliä) takaa kuvien täydellisen selkeyden. Lisäksi kamera on yhtä tehokas myös yöllä, sillä siinä on yökuvaustila, jonka kantama on 5 metriä.
Kamera tukee jopa 128 Gt:n microSD-muistikortteja (eivät sisälly toimitukseen) kuvien tallentamista varten ja sen joustavan, taipuisan muotoilun ansiosta sen voi asettaa lähes minne tahansa huoneessa. Se tallentaa videoita 110 asteen katselukulmasta 1/4 tuuman CMOS-anturin ansiosta.
Toimitukseen sisältyy 3M-tarratyyny, jolla voit kiinnittää kameran seinään

Nedis SmartLife
Laaja ja jatkuvasti kasvava tuotevalikoima, joka sisältää muun muassa polttimoita, kytkimiä, pistorasioita, antureita ja kameroita, joita voi hallita helppokäyttöisellä sovelluksella.
Etsitpä sitten yksittäistä älypolttimoa tai -pistorasiaa tai haluat automatisoida koko kotisi, valikoimastamme löydät tarvitsemasi älyteknologian.

Pakkaus

Pakkaussisältö

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
67 mm 97 mm 140 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 65 mm 95 mm 140 mm 187 g
40 330 mm 305 mm 405 mm 8200 g

Tuotteen tekniset tiedot

Leveys 53 mm
Korkeus 112 mm
Syvyys 50 mm
Paino 107 g
Väri Valkoinen
Sisäänrakennettu mikrofoni Kyllä
Laitteen tulovirran liittimet Micro USB
Tulovirta 1.0 A
Virtakaapelin pää B Micro USB
Virtakaapelin pää A USB
Virtalähteen tyyppi Verkkovirtakäyttöinen
Materiaali Muovi
Pilvipalvelutallennus mahdollisuus Kyllä
Integroidut kaiuttimet Kyllä
Maksimi kuvantarkkuus HD 720p
Yökuvaus 5 m
Megapikselit 1 MPixel
Linssi 4.0 mm
Virtakaapelin pituus 2.00 m
Sopii käytettäväksi Nedis® SmartLife
Katselukulma 110 °
Kuvapiiri 1/3" CMOS
LED 1
Tarvikkeet Verkkosovitin EU-Pistoke
Itsestäänkiinnittyvä lätkä
USB-kaapeli
Tulojännite 5 V DC
Maksimi virrankulutus 2.5 W
Virtapistoke Euro
Maksimi lähetysantennin vahvistus 3 dBi
Maksimi lähetysteho 14 dBm
Liiketunnistimella Kyllä
Sovellus saatavana kohteeseen Android™
IOS
Lähetystaajuuden alue 2400 - 2483.5 MHz
Tallennustyyppi MicroSD (ei sisälly)
Pilvipalvelutallennus (valinnainen)
Pakkauksessa olevien tuotteiden määrä 1 kpl
Tuettu langaton tekniikka Wi-Fi
Toimintalämpötila-alue -20 - 50 °C

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, it only works for the camera device you have subscribed it with.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

When you SD-Card or Memory is full, the oldest file will be overwritten.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.